K1-889
POLY (ACRYLIC-ACID) MULTI-USE WATERPROOF SLURRY
Poly (Acrylic-Acid) Multi-Use Waterproof Slurry is a one part waterborne Acrylic-Acid modified waterproof coating that comprising of special cement based components and admixtures. This product is produced for direct application to a variety of construction substrates.
使用範圍：
塗佈類型：
- UV-Resistance.
- Easy to use and apply.
- Good adhesion with excellent workability.
- Protects against water penetration.
- Low odor compared to bitumen coatings.
- Economical.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Trowel |
| Drying Time | Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | Wet 500 µm, Dry 300 µm |
| Available Sheen | Flat |
| Viscosity | 33,000-38,000 m.Pas at 25°C |
| Solid Content | 60%±2% |
| Available Size | 5 Gallon |
| Thinner | Water |
| Shelf Life | 24 months unopened condition |
| Color | Grey |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface.
- In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Product must be completely agitated (mechanically or manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
- Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
- Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
- Interior and Exterior Wall, Pond, Bathroom, Kitchen, Window Siding / Panel, Balcony, Terrace and etc.
- 5 m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |