Floor Coating

RCF-1000

WATER-BASED CONCRETE DENSIFIER

Water-Based Concrete Densifier is a chemical hardener compound which is proprietary, waterborne, ready-to-use clear silicate liquid. Water-Based Concrete Densifier formulated with chemically reactive raw-materials to harden and dustproof concrete. It offers substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the concrete surface when compared to untreated concrete.

Recommend Uses

  • Surfaces require hardened, dustproofed, chemical and abrasion resistant feature.
    Ideal for industrial factories, refineries and heavy pedestrian floor traffic areas.

Coverage

  • 0.1-0.2 kg/mper Gallon

Details

  • Ready to use from container. Easy application.
  • Protects against scratching and peeling.
  • Dustproofs and improves chemical, petroleum and abrasion resistance of treated surfaces.
  • Penetrates deeply into concrete to densify and harden surfaces to help prevent entry of moisture and other foreign matter.
  • Provides tough, protected surface that won’t after-yellow, discolor, or show pedestrian or vehicular traffic wear marks.

Technical Data

Tools Nylon / Polyester Brush, Sponge Paint Roller
Drying TIme Fully Dry 2-3 Days
Available Sheen Gloss
Viscosity <500 m.Pas at 25°C
Available Size 5 Gallon
Shelf Life 24 months unopened condition
Colore Transparent

Applications

Surface Preparation
  • All new masonry, concrete, cement or block must be cured for 14-30 days at recommended.
  • Use professional grinding machine to remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
  • Product must be completely agitated (manually only) before use.
  • Dilution is prohibited.
  • One uniform coat is needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and roll or broom out any puddles until the sealer penetrates the substrate.
  • Application of two coats at the recommended practical coverage when application to new surfaces. Recoat time between each layers should be at least 30-60 minutes.

Downloads

Not all products are available online. Please contact your store or sales representative for more information.

Datasheet Adobe Reader Download
Product Datasheet Download

Contact Us

Your satisfaction is very important to us. If you have any question about our products or services, or any other comments and suggestions, please feel free to contact our customer team.