KPA-1000
EPOXY STRUCTURAL AB JOINT ADHESION
Epoxy Structural AB Joint Adhesion is two part non-solvent epoxy adhesive joint. Suitable for interior and exterior use. It is easy to work with and presents very low shrinkage. It adheres perfectly to coarse and porous surfaces without primer.
Details
- Non-solvent epoxy.
- Great hardness.
- Great adhesion.
- Excellent thixotropic.
- Elastomeric. Crack resistance.
Technical Data
| Tools | Taping Knife |
| Drying TIme | Touch Dry 3-6 Hours, Recoat 24 Hours Fully Dry 24 Hours (at 25°C) |
| Available Sheen | Semi-Gloss |
| Available Size | 1:1 kg / 5:5 kg / 10:10 kg / 23:23 kg |
| Shelf Life | 24 months unopened condition |
| Color | Component A: Green Component B: Light Gray |
Applications
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
- Both components must be completely agitated (mechanically or manually) before use.
- After mixing of both components the material is ready for processing.
- Using a taping knife to a thickness of up to 0.5-1mm per coat. Any surface lines can be smoothed out just by pressing the taping knife on the surface repeatedly.
Downloads
Not all products are available online. Please contact your store or sales representative for more information.
| Datasheet | Adobe Reader Download |
|---|---|
| Product Datasheet | Download |
