K1-610
WATER-BASED CONCRETE & MASONRY PRIMER
K1-610 is a styrene-acrylic coating specifically engineered for interior and exterior. It’s prefect for sealing and conditioning porous masonry surfaces.
Details
- Sealer and adheres to concrete, brick and plaster.
- Conditions porous masonry surfaces.
- Economical.
Technical Data
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Sprayer |
| Drying Time | Touch Dry 30-60 Minutes, Recoat 1-2 Hours (at 25°C) |
| Thickness | Dry 50 µm |
| Available Sheen | Flat |
| Viscosity | <500 m.Pas at 25°C |
| Available Size | 1 Gallon, 5 Gallon |
| Shelf Life | 36 months unopened condition |
| Color | Milky White |
Applications
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Product must be completely agitated (mechanically or manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is prohibited! Minimum of one coat is required. Second coat is strongly recommended for the best result.
Downloads
Not all products are available online. Please contact your store or sales representative for more information.
| Datasheet | Adobe Reader Download |
|---|---|
| Safety Datasheet | Download |
| Product Datasheet | Download |
