K1-907
WATER-BASED PENETRATING WATERPROOF PAINT
Employ the latest waterproofing technology in a range of systems applicable to porous substrates, such as concrete, brickwork, stone and mortar. K1-907 treatment can be used on any porous substrate without changing its appearance, to maintain a dry look. This white spirit-based formula penetrates deep into pores and lines them with the product, reducing the pore size to that liquid can longer pass through the substrate, while still allowing it to breathe.
Details
- Easy to apply.
- Non-Yellowing, Alkali and UV resistant.
- Invisible, dry and natural look finish.
- Protection against damage caused by moisture intrusion.
- No more scrubbing and power washing.
- Decreases dirt adhesion and prevents moss and mildew growth.
Technical Data
Tools | Nylon / Polyester Brush, Sponge Paint Roller, Sprayer |
Drying Time | Touch Dry 5-10 Minutes, Recoat 30-60 Minutes (at 25°C) |
Thickness | Permeable non-film formed on the surface |
Available Sheen | Flat |
Viscosity | >500 m.Pas at 25°C |
Available Size | 1 Gallon, 5 Gallon |
Shelf Life | 36 months unopened condition |
Color | Transparent |
Applications
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- DO NOT DILUTE THIS PRODUCT.
- Product must be completely agitated (mechanically or manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Application of 2-3 coats at the recommended film thickness / practical coverage when application to new surfaces.
Downloads
Not all products are available online. Please contact your store or sales representative for more information.
Datasheet | Adobe Reader Download |
---|---|
Safety Datasheet | Download |
Product Datasheet | Download |