K2-307
PC-CIDE TWO COMPONENT ELASTIC WATERPROOF SLURRY
PC-CIDE Two Component Elastic Waterproof Slurry is a two part Acrylic Acetate modified, ready-to-use liquid waterproofing compound combined with imported crystalline waterproofing aggregate. This is the most suitable product for the waterproofing of masonry structures and mortar. It consist excellent waterproof performance by forming the non-soluble layer throughout the pore and capillary structure of the concrete and seal the concrete permanently against penetration of water.
Details
- Reduced water absorption.
- Reduced water penetration under pressure.
- Good adhesion with excellent workability.
- Enhancement of self-healing properties of the concrete.
- Reduced vapour transmission.
- Non-toxic and chloride free.
- Imported crystalline waterproofing aggregate.
Technical Data
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Trowel |
| Drying Time | Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | Thick Layer: Wet 950 µm, Dry 700 µm Thin Layer: Wet 480 µm, Dry 370 µm |
| Available Sheen | Flat |
| Viscosity | 7,000-8,000 m.Pas at 25°C |
| Solid Content | 75%±2% |
| Available Size | 18:20kg Pack |
| Thinner | Water |
| Shelf Life | 24 months unopened condition |
| Color | Milky White |
Applications
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Resin compound must be completely agitated (mechanically or manually) before use.
- Intermix the resin compound with aggregate (cement / sand) with ratio of 1:1.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
- Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
Downloads
Not all products are available online. Please contact your store or sales representative for more information.
| Datasheet | Adobe Reader Download |
|---|---|
| Safety Datasheet | Download |
| Product Datasheet | Download |
