Floor Coating

KE-064

WATER-BASED EPOXY CONCRETE FLOOR PAINT

Water-Based Epoxy Concrete Floor Paint is a two part, waterborne self-smoothing epoxy floor paint. The chemical resistance and hard, impact-resistant finish of Water-Based Epoxy Concrete Floor Paint makes it the ideal coating for high traffic areas like hospitals, schools, restaurants, warehouses, factories, parking structures and garages. Its excellent hide and great coverage minimizes the number of coast needed. Specially formulated for black, drywall, masonry and concrete, it’s the perfect coating for almost any commercial project that demands durability, performance and the ability to withstand repeated cleanings.

Recommend Uses

  • Indoor concrete surfaces.
  • Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
  • Hospitals, Schools, Restaurants, Warehouse, Factories, Parking Structures, Garages, Laboratories, Commercial Offices and etc.

Coverage

  • 3.6:0.9 kg about 16-20m2
  • 12:3.6 kg about 66-73m2

Details

  • Enhanced performance, two component product.
  • Excellent stain blocking properties.
  • Flows and levels to a smooth finish.
  • Corrosion and chemical resistant.
  • Excellent adhesion and durability.
  • High hardness with 3H Pencil Hardness Test.

Technical Data

Tools Nylon / Polyester Brush, Sponge Paint Roller, Sprayer
Drying Time Touch Dry 8-9 Hours, Fully Dry 7 Days,
Recoat 14-16 Hours (at 25°C)
Thickness Wet 80-150 µm, Dry 50-100 µm
Available Sheen Gloss
Viscosity 1,000-2,000 m.Pas at 25°C
Solid Content 60%±2%
Available Size 3.6 : 0.9 kg  /  12 : 3.6 kg
Thinner Water
Shelf LIfe 12 months unopened condition
Color 064 Gray
067 Dark Green

Applications

 Surface Preparation
  • All new masonry, concrete, cement or block must be cured for 30 days at recommended.
  • Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
  • Resin compound must be completely agitated (mechanically or manually) before use.
  • Intermix the resin compound with aggregate (cement / sand) with ratio of 1:1.
  • Intermix containers of same product to ensure color and seen uniformity.
  • Dilution is not recommended. However if the dilution is required, do not dilute more than 5% of clean water. Dilution may cause reducing the sheen.
  • Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
  • Working time is about 70 minutes after mixing. 

Downloads

Not all products are available online. Please contact your store or sales representative for more information.

Datasheet Adobe Reader Download
Safety Datasheet Download
Product Datasheet Download

Contact Us

Your satisfaction is very important to us. If you have any question about our products or services, or any other comments and suggestions, please feel free to contact our customer team.