Waterproof Paint

K1-424

ULTIMATE FIBER REINFORCED WATERPROOF COATING

K1-424 is a high quality exterior roof coating with Fiberglass Technology for excellent early moisture resistance. This product is a 100% acrylic coating that has the wide range of surfaces application. This premium formulation is UV resistant, and won’t chalk, crack or peel on properly prepared surfaces. This decorative coating resists fading and mildew resistant.

Recommend Uses

  • Exterior concrete surfaces.
  • Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.

Coverage

  • 10m2 Coverage per Gallon

Details

  • Fiberglass Technology, enhanced elasticity and tensile strength.
  • Outstanding adhesion to most roofing material.
  • Excellent early moisture resistant.
  • Excellent durability, cracking and peeling resistant.
  • Ponding water resistant.
  • Fading and mildew resistant.

Technical Data

Tools           Nylon / Polyester Brush, Sponge Paint Roller
Drying Time Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C)
Thickness Wet 550 µm, Dry 300 µm
Available Sheen Flat
Viscosity 12,500-13,500 m.Pas at 25°C
Solid Content 55%±2%
Available Size 1 Gallon, 5 Gallon
Thinner Water
Shelf Life 36 months unopened condition
Color 424 Gray
425 Ivory White
426 Elegant White
427 Green
428 Dark Red
466 Snow White

Applications

Surface Preparation
  • All new masonry, concrete, cement or block must be cured for 30 days at recommended.
  • Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
  • Product must be completely agitated (manually only) before use.
  • Intermix containers of same product to ensure color and seen uniformity.
  • Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
  • Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
  • Priming may not be needed when application on previously painted. Consult with your representative before application.

Downloads

Not all products are available online. Please contact your store or sales representative for more information.

Datasheet Adobe Reader Download
Safety Datasheet Download
Product Datasheet Download

Contact Us

Your satisfaction is very important to us. If you have any question about our products or services, or any other comments and suggestions, please feel free to contact our customer team.