HBN-888

HYBOLEN HIGH ELASTIC RUBBER WATERPROOF COATING

Hybolen High Elastic Rubber Waterproof Coating is made of imported water-based rubber emulsion, which is non-toxic and non-irritating. This product has very superior ductility and tensile strength. It has strong coating film with high puncture resistance, high tear strength and imperviousness. It’s suitable for high grade anti-puncture constructions such as bathrooms, gardens, sky gardens.
使用範圍:
塗佈類型:
產品技術資料表 安全成份表
  • Fast reactivity and curing time.
  • Excellent crack bridging properties.
  • Moderate chemical resistance.
  • Good abrasion resistance.
  • Excellent puncture resistance, high tear-ability and impermeability.
  • Large coating areas to reduce construction and material costs.
Tools Nylon / Polyester Brush, Sponge Paint Roller, Sprayer
Drying Time Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C)
Thickness Wet 300 µm, Dry 100 µm
Available Sheen Semi-Gloss
Viscosity <500 m.Pas at 25°C
Solid Content 30%±2%
Available Size 5 Gallon
Shelf Life 12 months unopened condition
Color Black
Surface Preparation
  • All new masonry, concrete, cement or block must be cured for 30 days at recommended.
  • Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
  • Resin compound must be completely agitated (mechanically or manually) before use.
  • Intermix the resin compound with aggregate (cement / sand) with ratio of 1:1.
  • Intermix containers of same product to ensure color and seen uniformity.
  • Dilution is no needed.
  • Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
  • 1-2 days after the completion of the application, the surface is ready for the tile installing work.
  • Note: If just wanted to apply cement as a protective film above the KRC-200, please apply one coat of the prime before applying the cement.
  • Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
  • Swimming Pool, Pond, Bathroom, Garden, Sky Garden, Kitchen, Window Siding / Panel, Balcony, Terrace and etc.
  • 19.8mCoverage per Gallon
推薦產品 HOT PRODUCTS