K1-905
WATER-BASED WATER REPELLENT PENETRATING AGENT
K1-905 provide reliable protection from water and atmospheric moisture for a masonry surfaces. This high quality water repellents create a hydrophobic barrier that prevents the intrusion of water and waterborne salts into the structure. K1-905 greatly reduces damaging moisture penetrations into masonry and concrete.
使用範圍：
塗佈類型：
- Easy to apply.
- Filled porous and reduce water damages.
- Invisible, dry and natural look finish.
- Protection against damage caused by moisture intrusion.
- Prevents moss and mildew growth.
- Imported inorganic silicon resin.
| Tools | Soak |
| Drying Time | Touch Dry 24 Hours, Recoat 36 Hours (at 25°C) |
| Thickness | Permeable non-film formed on the surface |
| Available Sheen | Flat |
| Viscosity | >500 m.Pas at 25°C |
| Available Size | 5 Gallon |
| Shelf Life | 36 months unopened condition |
| Color | Transparent |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- DO NOT DILUTE THIS PRODUCT.
- Product must be completely agitated (mechanically or manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Application is carried out by soaking, and the entire surface must be evenly penetrated with K1-905.
- Minimum of one coat is required. Second coat is recommended for the best result. The recoat time is approximately 36 hours.
- Concrete, Brickwork, Masonry Blocks, Natural Stones, Stucco, Traffic Bearing Surfaces.
- 10m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |