HW-1600
WATER-BASED MULTIUSE WOODEN PAINT
Water-Based Multiuse Wooden Paint is a specially formulated protective colored finish for exterior or interior wood that is exposed to sunlight, water or temperature changes. Formulated to comply with environmental regulations that limit VOC content.
使用範圍：
塗佈類型：
- Contains UV blockers to reduce the sun’s graying and fading effects.
- Specially formulated to protect against rain and moisture.
- Special raw-material allow the finish to expand and contract with the wood as seasons and temperature change.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Sprayer |
| Drying Time | Touch Dry 30-60 Minutes, Recoat 3-4 Hours (at 25°C) |
| Thickness | Wet 300 µm, Dry 100 µm |
| Available Sheen | Gloss |
| Viscosity | <500 m.Pas at 25°C |
| Available Size | 1 Liter, 1 Gallon, 5 Gallon |
| Shelf Life | 24 months unopened condition |
| Color | 101 Transparent 102 Pine 103 Oak 104 Teak 105 Red Oak 106 Black Walnut |
Surface Preparation
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- New wooden surfaces must be fully sanded before the application.
- Product must be completely agitated (manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is prohibited.
- Application of 2-3 coats at the recommended film thickness / practical coverage when application to new wooden surfaces.
- Application Recommendations: Temperature 50-95°F / Wood Moisture <18% / Humidity <75%
- Exterior and Interior wooden surfaces.
- 33m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |