- Low shrinkage proven by industry standard test methods (ASTM C348).
- High compressive and flexural strengths.
- Excellent freeze durability and resistance to deicing salts.
- Improved carbon dioxide resistance.
| Tools | Trowel |
| Drying Time | Touch Dry 2-4 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | 3mm, 5mm |
| Available Sheen | Flat |
| Viscosity | <500 m.Pas at 25°C |
| Solid Content | 80±2% |
| Available Size | 4:19 kg / 16:76 kg |
| Thinner | Water |
| Shelf Life | 36 months unopened condition |
| Color | 903 Gray |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
- Product must be completely agitated (manually only) before use.
- Intermix the resin compound with aggregate for at least three minutes before application.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
- Priming and application at the recommended film thickness / practical coverage when application to new surfaces.
- Indoor concrete surfaces.
- Parking Structures, Warehouses, Factories, Laboratories, Commercial Offices and etc.
- 4:19 kg about 5-6.7m2
- 16:76 kg about 20-26.8m2
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |