- Sealer and adheres to concrete, brick and plaster.
- Conditions porous masonry surfaces.
- Economical.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Sprayer |
| Drying Time | Touch Dry 30-60 Minutes, Recoat 1-2 Hours (at 25°C) |
| Thickness | Dry 50 µm |
| Available Sheen | Flat |
| Viscosity | <500 m.Pas at 25°C |
| Available Size | 1 Gallon, 5 Gallon |
| Shelf Life | 36 months unopened condition |
| Color | Milky White |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Product must be completely agitated (mechanically or manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is prohibited! Minimum of one coat is required. Second coat is strongly recommended for the best result.
- Concrete, Concrete Block, Brick, Stucco, Fiber Cement Siding, Mortar, Exterior Wall Cladding.
- 13m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |