K2-211
ACRYLIC-BASED ELASTIC WATERPROOF SLURRY
Acrylic-Based Elastic Waterproof Slurry is a ready-to-use liquid waterproofing compound which reacts with the constituents of sand: cement mix to block capillaries and pores in concrete. Whilst effective blocking the passage of water, the substrate still continues to breath.
使用範圍：
塗佈類型：
- Reduced water absorption.
- Improved water-tightness.
- Improved workability.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Trowel |
| Drying Time | Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | Thick Layer: Wet 950 µm, Dry 750 µm Thin Layer: Wet 480 µm, Dry 370 µm |
| Available Sheen | Flat |
| Viscosity | 7,000-8,000 m.Pas at 25°C |
| Available Size | 18:20kg Pack |
| Thinner | Water |
| Shelf Life | 24 months unopened condition |
| Color | Milky White |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Resin compound must be completely agitated (manually) before use.
- Intermix the resin compound with aggregate (cement / sand) with ratio of 1:1.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
- Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
- Note: 3rd or 4th layer is needed if intermix with Aggregate B07.
- Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
- Interior and Exterior Wall, Rooftop, Pond, Bathroom, Kitchen, Window Siding / Panel, Balcony, Terrace and etc.
- 33 m2 per pack
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |