K1-107
NON-YELLOWING TRANSPARENT WATERPROOF COATING
Unique transparent waterproof coating that will adhere to all the inorganic surfaces. K1-107 is used mainly to waterproof tiled surfaces by an easy application over the surface. Eliminating the need to remove tiling and waterproof the terrace from below, but it is also use to waterproof all kind of support. It gives an impermeable, smooth, non-pigmented barrier to the surface.
使用範圍：
塗佈類型：
- Easy to apply.
- Non-Yellowing, Alkali and UV resistant.
- Long lasting transparency.
- Great elasticity and waterproofing effect.
- Shinny or matte finish.
- Protect building materials from the elements, water ingress, pollution and acid rain.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Sprayer |
| Drying TIme | Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | Wet 350 µm, Dry 120 µm |
| Available Sheen | Flat, Gloss |
| Viscosity | >500 m.Pas at 25°C |
| Available Size | 1 Liter, 1 Gallon, 5 Gallon |
| Shelf Life | 36 months unopened condition |
| Color | Transparent |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
- Product must be completely agitated (mechanically or manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is no needed.
- Application of 2-3 coats at the recommended film thickness / practical coverage when application to new surfaces.
- Aluminum, Kitchen Cabinets, Varnished Woodwork, Glazed Block, Ceramic Tile, Glass, PVC Piping, Mosaic, Stone and Marble.
- 13m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |