KE-064
WATER-BASED EPOXY CONCRETE FLOOR PAINT
Water-Based Epoxy Concrete Floor Paint is a two part, waterborne self-smoothing epoxy floor paint. The chemical resistance and hard, impact-resistant finish of Water-Based Epoxy Concrete Floor Paint makes it the ideal coating for high traffic areas like hospitals, schools, restaurants, warehouses, factories, parking structures and garages. Its excellent hide and great coverage minimizes the number of coast needed. Specially formulated for black, drywall, masonry and concrete, it’s the perfect coating for almost any commercial project that demands durability, performance and the ability to withstand repeated cleanings.
使用範圍：
塗佈類型：
- Enhanced performance, two component product.
- Excellent stain blocking properties.
- Flows and levels to a smooth finish.
- Corrosion and chemical resistant.
- Excellent adhesion and durability.
- High hardness with 3H Pencil Hardness Test.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Sprayer |
| Drying Time | Touch Dry 8-9 Hours, Fully Dry 7 Days, Recoat 14-16 Hours (at 25°C) |
| Thickness | Wet 80-150 µm, Dry 50-100 µm |
| Available Sheen | Gloss |
| Viscosity | 1,000-2,000 m.Pas at 25°C |
| Solid Content | 60%±2% |
| Available Size | 3.6 : 0.9 kg / 12 : 3.6 kg |
| Thinner | Water |
| Shelf LIfe | 12 months unopened condition |
| Color | 064 Gray 067 Dark Green |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
- Resin compound must be completely agitated (mechanically or manually) before use.
- Intermix the resin compound with aggregate (cement / sand) with ratio of 1:1.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 5% of clean water. Dilution may cause reducing the sheen.
- Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
- Working time is about 70 minutes after mixing.
- Indoor concrete surfaces.
- Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
- Hospitals, Schools, Restaurants, Warehouse, Factories, Parking Structures, Garages, Laboratories, Commercial Offices and etc.
- 3.6:0.9 kg about 16-20m2
- 12:3.6 kg about 66-73m2
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |