KF-1088

WATER-BASED FIRE RETARDANT PAINT

Water-Based Fire Retardant Paint is a thin-film waterborne, decorative, protective coatings designed to reduce the spread of flames in the event of fire. These coatings have the appearance of traditional paints and varnishes, comply with building and fire codes, and give the substrate rated flame spread protection.
使用範圍:
塗佈類型:
產品技術資料表 安全成份表
  • Achieves the equivalent to Class 2, CNS Standard 11728.
  • Can be over-coated with waterborne latex paints.
  • Fast and easy application.
  • One part water-based product.
  • Decorative and protective matt finish coating.
Tools Nylon / Polyester Brush, Sponge Paint Roller, Sprayer
Drying Time Touch Dry 30 Minutes, Recoat 2-6 Hours (at 25°C)
Thickness See Coverage for reference
Available Sheen Flat
Viscosity 6,000-8,000 m.Pas at 25°C
Solid Content 65%±2%
Available Size 1 Gallon
Thinner Water
Shelf Life 12 months unopened condition
Color White, 70 Lily White
Surface Preparation
  • Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
  • Product must be completely agitated (mechanically or manually) before use.
  • Intermix containers of same product to ensure color and seen uniformity.
  • Dilution is not recommended. However if the dilution is required, do not dilute more than 20% of clean water.
  • Application at the recommended film thickness / practical coverage when application to new surfaces. See Technical Data below for more details.
  • Interior concrete surfaces.
  • Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
  • Schools, Hospitals, Hotels, Restaurants, Residential, Commercial, Industrial, Laboratories, Warehouse, Offices and Factories.
  • 0.19 kg/m2 per layer / Minimum of 5 Layers are Required
推薦產品 HOT PRODUCTS