K1-103
ACRYLIC LIGHTWEIGHT PUTTY
Ready to use, lightweight, repair acrylic putty, with zero shrinkage. Acrylic Lightweight Putty is suitable for quick crack repairs and the patching of holes, up to 5cm deep. Use it on walls, ceilings and plastered surfaces made of concrete, wood and gypsum board, both indoors and outdoors. Doesn’t burst nor crack and it is paintable over in less than an hour.
使用範圍：
塗佈類型：
- Ready to use and easy application.
- Maximum filling capacity with minimal weight.
- Doesn’t burst nor crack.
- Quick drying, can be drilled and nailed.
- Paintable over in less than an hour.
| Tools | Taping Knife |
| Drying Time | Touch Dry 1-2 Hours, Recoat 6-8 Hours, Fully Dry 12-24 Hours (at 25°C) |
| Available Sheen | Flat |
| Avilalbe Size | 1 Liter, 1 Gallon, 5 Gallon |
| Thinner | Water |
| Shelf Life | 24 months unopened condition |
| Color | White |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean.
Application Details
- Product must be completely agitated (manually) before use.
- Dilution is prohibited.
- Using a taping knife to a thickness of up to 0.5mm per coat. Any surface lines can be smoothed out just by pressing the taping knife on the surface repeatedly.
- If the product dries, erase any lines or grain marks from the surface by lightly sanding it using a sandpaper. If required, follow with a second coat.
- Ideal for quick crack repairs and the patching holes.
- Walls, Ceilings and Plastered Surfaces made of Concrete, Wood and Drywall.
- 2m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |