K2-917

CONCRETE SHIELD WEAR-RESISTANT FLOOR COATING

Concrete Shield Wear-Resistant Floor Coating is a durable, flexible and wear-resistant floor coating for balconies, terraces, stairs, walkways, warehouse and etc. Concrete Shield Wear-Resistant Floor Coating is a one part pigmented, Polyurethane-SBR modified product.
使用範圍:
塗佈類型:
產品技術資料表 安全成份表
  • Elastic.
  • Excellent UV and Yellowing resistance.
  • Outstanding weather resistance.
  • Outstanding adhesion to concrete and metal surfaces.
  • Abrasion resistant under normal traffic conditions.
Tools Nylon / Polyester Brush, Sponge Paint Roller, Sprayer
Drying Time Touch Dry 2-4 Hours, Recoat 6-8 Hours (at 25°C)
Thickness Wet 350 µm, Dry 200 µm
Available Sheen Gloss
Viscosity 10,000-12,000 m.Pas at 25°C
Solid Content 54±2%
Available Size 1 Gallon, 5 Gallon
Shelf Life 36 months unopened condition
Color 914 Gray
917 Dark Green
Surface Preparation
  • All new masonry, concrete, cement or block must be cured for 30 days at recommended.
  • Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
  • Product must be completely agitated (manually only) before use.
  • Intermix containers of same product to ensure color and seen uniformity.
  • Dilution is not recommended.
  • Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
  • Priming may not be needed when application on previously painted. Consult with your representative before application.
  • Indoor concrete surfaces.
  • Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
  • Balconies, Terraces, Footbridges, Stairs, Walkways, Warehouse, Laboratory, Galleries and etc.
  • 20m2 Coverage per Gallon
推薦產品 HOT PRODUCTS