- Fiberglass; enhanced the tensile strength.
- Outstanding adhesion to most roofing material.
- Excellent durability, cracking and peeling resistant.
- Ponding water resistant.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller |
| Drying Time | Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | Wet 550 µm, Dry 300 µm |
| Available Sheen | Flat |
| Viscosity | 10,000-12,000 m.Pas at 25°C |
| Solid Content | 50%±2% |
| Available Size | 1 Gallon, 5 Gallon |
| Thinner | Water |
| Shelf Life | 36 months unopened condition |
| Color | 524 Gray 526 White 527 Green 529 Lily White |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Product must be completely agitated (manually only) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
- Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
- Priming may not be needed when application on previously painted. Consult with your representative before application.
- Exterior concrete surfaces.
- Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
- 10m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |