K1-305
INORGANIC BONDING PRIMER
K1-305 is a one component primer which designed for surfaces that require a greater degree of adhesion than our standard primers can offer. It designed for coating hard, glossy surfaces like tile, glass panels and plastic pipping with minimal surface preparation. Can be tinted and is compatible with a full range of finish coat products.
使用範圍：
塗佈類型：
- Tightly bonds to most glossy surfaces.
- Assures uniform appearance of topcoats.
- One coat applications.
- Assures adhesion of the topcoat to hard-to-stick surfaces.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller |
| Drying Time | Touch Dry 1-2 Hours, Recoat 1-2 Hours (at 25°C) |
| Thickness | Dry 100 µm |
| Available Sheen | Flat |
| Viscosity | <10,000 m.Pas at 25°C |
| Solid Content | 55%±2% |
| Available Size | 1 Gallon, 5 Gallon |
| Shelf Life | 36 months unopened condition |
| Color | Gray White |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Stir paint thoroughly before use. Intermix containers of same product to ensure color and seen uniformity.
- Dilution is prohibited! Minimum of one coat is required. Second coat is strongly recommended for the best result.
- Sealer for concrete surface and reinforced concrete.
- Bonding agent between previous defective paint and new waterborne emulsion paint / slurry.
- 13m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |