K1-600
WATER-BASED ASPHALT WATERPROOF COATING
Water-Based Asphalt Waterproof Coating is a solvent free, flexible thick film coating based on rubber bitumen emulsion with pastry consistency. When applied to concrete surface, it provides protection against the penetration of salty water and mild soil acids.
使用範圍：
塗佈類型：
- High Solid Content EVA Emulsion.
- Excellent adhesion to the concrete surface.
- Easy to use and apply. No mixing or heating.
- Bridges shrinkage and hairline cracks.
- Odourless and fungus resistant.
- Economical.
| Tools | Nylon / Polyester Brush, Sponge Paint Roller, Trowel |
| Drying Time | Touch Dry 1-2 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | Wet 400 µm, Dry 200 µm |
| Available Sheen | Flat |
| Viscosity | 11,500-12,500 m.Pas at 25°C |
| Solid Content | 50%±2% |
| Available Size | 5 Gallon |
| Thinner | Water |
| Shelf Life | 24 months unopened condition |
| Color | Black |
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
- Product must be completely agitated (mechanically or manually) before use.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
- Priming and application of two coats at the recommended film thickness / practical coverage when application to new surfaces.
- Concrete Block, CMU, Brick Stucco, Cement, Concrete Surface, Cement Composition Siding / Panel, Asbestos and Wood.
- Pond, Bathroom, Kitchen, Window Siding / Panel, Balcony, Terrace and etc.
- 5.3m2 Coverage per Gallon
推薦產品 HOT PRODUCTS
K1-100
ULTIMATE MULTI...
K1-680
ULTIMATE ALL-P...
 |
 |
 |