Efflorescence is a kind of water leakage phenomenon, and it is also a phenomenon of deterioration of cement products, which is academically known as the white-washed phenomenon. Therefore, when efflorescence occurs, it is also the beginning of wall aging.
In fact, water leakage is not limited to water dripping down, or the reflection of water is considered a leakage. Non-cement building materials will not produce efflorescence, but will produce yellowing or discoloration, which is also a kind of water leakage.
Elastic Putty is a reinforced formula with high elasticity, and it has excellent waterproofing effect, suitable for indoor/outdoor use. Its high elasticity can effectively prevent cracking against the vibration or other factors. Premium Putty is mainly used for wall finishing and has no waterproofing effect, and is limited to indoor use only. It mainly enhances the adhesion strength and hardness to provide a more durable surface, and the elasticity of the wall and the paint after patching significantly reduces the possibility of cracking and peeling of the paint. It is a product designed for decoration construction needs. In order to make the wall surface smooth and even, the wall surface should be smoothed with sandpaper and then painted with lacquer. Compared with the Elastic Putty, the Premium Putty has the characteristics of easy grinding and effortless, so it is less laborious in the construction of finishing and meets the needs of general decoration construction.
Calcium carbonate powder is the main raw material of the putty, which is a chemical mixture used for construction. Its main function is to be used for wall priming and surface repair. The fine granules of the clay can completely fill the pores of the wall, and the wall surface after being plastered by the clay, and then smoothed by sandpaper, will produce an extremely smooth white surface, which can increase the sense of delicacy after painting, and can also facilitate the coloring of paint and reduce the amount of paint used. In addition, the resin contained in the clay can strengthen the adhesion of the paint and effectively reduce the possibility of cracking and peeling of the paint.
Elastic Putty is mainly used for filling cracks, fine lines and joints, and is not recommended for wall priming. Elastic Putty is not recommended for wall priming because it is flexible after drying and cannot be sanded with sandpaper for fine finishing.
Elastic Putty can be used on outdoor walls or walls that do not require sandpaper for finishing, because it has elasticity after drying and can reduce cracks and fine lines that may occur on the wall in the future.
K1-102 Premium Elastic Putty
AB Joint Adhesion is a special adhesive for light partition construction. AB Joint Adhesion is used to fill the joints of light partition panels (generally calcium silicate panels), which may cause cracking at the joints due to environmental factors (e.g. heat expansion and cold shrinkage or vibration), and the heat expansion and cold shrinkage of poorer quality panels is even more serious.
KPA-1000 Epoxy Structural AB Joint Adhesion
